| |
|
 |
|
|
|
|
TH40 POLE AND REEL DOLLY
The Hogg and Davis, Inc. Model TH40 means versatility. Fast becoming the industry standard workhorse, the TH40 combines the most sought after features into a smooth operating, long lasting, compact unit.
The key to this unit's popularity is hydraulics. The hydraulic mandrel lifts and idler wheel allows one man to load or unload reels without delaying other pieces of valuable equipment. Gone is the necessity of boom trucks standing by. Gone is the need for three or four men to wrestle heavy reels. The TH40 pays for itself in manpower savings alone. The TH40 is built to meet the requirements of any utility engaged in-strand and cable transporting and stringing, or pole and material handling; designed for the most demanding.
Idler Wheel: Bearing mounted idler wheel affords easy maneuverability of unit. Hydraulically actuated, this idler wheel elevates the tongue of a fully loaded trailer to proper level for hook-up to truck.
Bolster Chocks: Ruggedly constructed self-locking bolster chocks with built-in winch provide maximum binding power for loaded poles. Each winch chock is equipped with fifteen (15) feet of 3/8" high tensile strength wire ropes.
3-stage Pump: Specially constructed three-stage pump is conveniently located to control all hydraulic functions from a single position. Special handle and arrangement of pumps allow reel cylinders to lift simultaneously eliminating the problem of reels becoming cocked in the trailer.
Safety Stand: Quick release safety stands provide extra stability and support for paying off or pulling wire over rear of trailer. Spring loaded latch insures positive locking in the down position. Cadmium-plated safety stands resist the effects of weather to remain smooth working at all times.
Get the datasheet for the TH 40
Combo Pole and Reel Dolly in PDF format.
If you are a registered user already then login to download.
Otherwise register with HoggDavis.com - registration is FREE.
|
Recommended Capacity: 5,000 lbs. (2267 kg)
Dimensions: Length 10'2" x width 88" (3098mm x 2235mm)
Length Between Bolsters: 70" (1778mm)
Cargo Area: 50" x 60" (1270mm x 1524mm)
Reel Capacity: 72" dia. x 44" with brake (1828mm x 1117mm), 72" dia. x 50" without brake (1828mm x 1270mm)
Spindles & Hubs: 6,000 lbs (2721 kg)
Hydraulic Cylinders: (3) 2" bore x 9" stroke (50.8mm x 228.6mm)
Pump: H & D Special, hand operated, 3-stage, (2) 3/4" pistons - lifting cylinders, (1) 1" piston - idler wheel
Tires: LT235/85R16-10 ply tubeless
Wheel Brake: Electric 12V standard
Finish: Baked polyurethane finish
STANDARD EQUIPMENT
One - 2" Mandrel with Taper Cones and Locking Collars
Idler Wheel - Hydraulic Actuated, Spring Retracted, 360 deg. Swivel
(2) - Quick-Release Safety Stands and (4) Wheel chocks
Two Pair - Self-Locking Bolster Chocks with Winch
Two - 3/8" x 36" Safety Chain with Hook
Fender Incorporated - Lockable Tool Boxes
Center Pole Binder
Safety Electric Breakaway Switch
|
|
|
|
|
|
|
|
